Open topic with navigation
Status > Text Status
|
Text Status
|
The
allows
an operator to display the status of a selected component (and sub-components)
as well as all the characteristics associated with this component in a
text form. This menu option applies to all the system devices: applications,
gateways,
sites,
controllers, doors, relays and inputs. The text window contains additional
buttons/buttons that assist operators in their tasks:
•
The
first seven buttons
represent
system devices (Workstation, Gateway, connection, Controller, Door, Input and
Output).
•
Summary / Detailed list
—The
magnifying glass button is used to display components that are not in normal
condition. It displays a summary list or a detailed list.
•
Summary:
shows the components that are not in normal condition
•
Detail:
shows all the components in any condition.
•
Stop display
—This
button is used to stop the display when the information is taking too
much time. It cancels or interrupts the process.
•
Refresh
—Refreshes
the status of the selected components.
•
Print
—Use
this button to print the displayed status. You can preview your report
before printing it.
Displaying
a Component Status
1 -
From the
tab,
select the
button. The Text
window
appears.
2 -
In the
Text window, select the button of the component for which you want to view
the status. If you select the
button, the system displays the list of the EntraPass Applications defined
in the system.
3 -
You can
check the EntraPass application you want to display the status or enter
a few characters of the component name (field at the top) for the system
to searched in the database. For example, you can enter “Sec” for Security
Office. The system will highlight the first name containing the entered
characters. You may also click the
button
to select all the EntraPass applications; or select specific components
by clicking in the checkboxes next to each component name. The
button
removes the check marks from the selected components. Click
to
return to the previous window without any selections or changes.
4 -
You may
check the
option
(lower part of the window) to display detailed information on the sub-components
linked to the selected component. For example, if you selected a controller,
all its components (doors, relays, inputs) with appropriate status will
be displayed on the window if this option was checked. For more focus
in one window, filter doors, relays or inputs by connection.
5 -
Click
to return to the previous window and apply your selections.
Note:
The
Magnifying glass
button
is used to display components that are not in normal condition. When it
is in a “summary” position, only components that are not in normal condition
will be displayed; the “detailed” position, displays a full status of
all components.